⚠️ Note: This fork has been modified to work with the Arduino Mega2560 rev3 with an Arduino Ethernet Shield (which includes an SD card reader). Keep in mind, on the Mega, the hardware SS pin, 53, is ...

The bootloader looks for byte in eeprom at address 0x1FF: -if it is set to 0xF0 bootloader will look for a bin file on the sdcard named firmware.bin and use it to flash the firmware then reset the ...

Abstract: This research develops the maximum power point tracking (MPPT) device by Arduino ATmega2560 and express the values on 3.5-inch display. Moreover, all data ...

Chuck Todd has built a Arduino compatible Mega2560 expansion RAM that will enable those using the Arduino platform who need more that 8k RAM in the Arduino processor. Originally Todd created a ...